One platform. Sensors, system, cloud and a real team behind it.
The new generation of XiltriX; a purpose-built, mobile-first, cloud-based integrated system that keeps working through power and network outages.
What is XiltriX Resilience?
XiltriX Resilience is an independent environmental monitoring system for mission critical labs, hospitals and biobanks. Sensors measure each critical device separately from the device's own controller, readings run to monitoring stations that keep working through power and network outages, and a deviation is escalated automatically through your own on-call ladder until somebody acknowledges it. Your team responds to the alarm; the XiltriX 24/7 team keeps the monitoring system itself healthy and supplies the record you hand to an auditor.
One system, three layers, one accountable team.
Every customer gets the whole system. What changes is only how much of your facility it covers.
Our own sensors, system and connectivity. Designed and built by us, so there is no gap between the parts. Yours to buy, or to spread monthly through a lease. Requires only an internet connection and a power outlet. No access to your internal IT systems or business network is required.
Continuous monitoring, dashboards, alarm management, reporting and a full audit trail. A yearly agreement, with room to add capabilities as your needs grow.
Implementation, calibration and preventive maintenance, on an hourly basis, plus a battery replacement once every four years. And 24/7 support, included as standard.
One agreement. One accountable team. No layer works without the others.
Some budgets are capital, some are operating. We support both: a capital purchase, a lease, or a subscription, with monthly or yearly payments available through our leasing partners.
What happens the moment a value drifts.
Software alone sends a notification and hopes. XiltriX detects and escalates automatically around the clock, calling, texting and emailing everyone on your list until someone responds. When the monitoring itself falters, we are alerted and we restore it, often before you notice.
Monitor
Every critical parameter, measured by our own independent sensors, not your equipment's built-in electronics.
Detect
Deviations are detected and validated in real time, filtering out the noise that causes alarm fatigue.
Call
Alerts cascade across every path you configure: app, WhatsApp, SMS, email and phone.
Escalate
No acknowledgement? The chain keeps escalating, up the list and around the clock, until someone owns it.
Document
Every event, response and value is logged automatically. Your audit trail writes itself.
Five differentiators.
Open any one to see what stands behind it.
What operational resilience delivers
- Earlier detection of deviations
- Escalation that continues until acknowledged
- No monitoring gaps, even during power or network failure
- Audit readiness with a provable record
- Reduced operational risk
- Protected samples and research
- One accountable partner
Questions people ask
Short answers to the questions that come up in almost every conversation.
- What parameters can XiltriX measure?
- Temperature from -200 °C to +250 °C, CO₂, O₂, relative humidity, differential pressure, particle counts, liquid nitrogen level, door status, air flow, water conductivity, VOC, H₂O₂ during fumigation, light intensity, shaking motion and mains power. If a parameter carries risk in your process and can be sensed, it can usually be brought into the same system rather than sitting in a separate box with its own alarm.
- How often is each sensor read?
- Every sensor on the network is read multiple times per minute. The values are stored and compared against the alarm limits set for that specific device, continuously. That is what makes it a real-time system rather than a logger you read afterwards: a deviation is acted on while it is happening.
- What happens during a power failure?
- Every monitoring station has its own backup battery and monitors mains power as a parameter in its own right. The measurement continues and the alarm chain still works. That is deliberate: a power cut is exactly the moment monitoring matters, and it is exactly when a system without battery backup goes quiet.
- Who gets the alarm?
- The person on call, according to the schema agreed with you. Only the active on-call user is contacted first; there is no reason to wake a whole team when one person responds. If that person does not respond within the set time, XiltriX escalates automatically to further people, and after that to a different alarm channel altogether.
- Is there a person behind the system?
- Yes. XiltriX is a service, not a box: the monitoring is backed by our team, and the escalation schema is designed and tuned with you rather than left as a default setting. Responsibility for acting on an alarm in your lab stays with your organisation. What we guarantee is that the alarm reaches someone.
Three ways forward.
Pick the one that fits where you are today.